Want to know how to install your fiber cement panels properly? We’ve got you covered. Check out our installation guidelines and resources below.
Metal Installation Guidelines
Wood Installation Guidelines
Interior Installation Guide
Fabrication, Maintenance & Jobsite Storage
Adhesive Bonding Installation Guide
AFC Groove Installation Guidelines
AFC Minerit Sealing Requirements
Delta Vent SA Installation Guide
Delta Vent S Installation Guide
Delta Fassade SA Installation Guide
Delta Fassade S Installation Guide
If you’re not sure where to start when it comes to installing your fiber cement panels, these videos are for you. Our videos walk you through the installation process from start to finish, so you can get the most out of our state-of-the-art products.
Green Girt Continuous Insulation Substructure
Standard Substructure with Rigid Insulation
Delta Fassade S Weather Barrier
Open Joint Rainscreen Flashing
How to Cut & Drill High-Density Fiber Cement
AFC Panel Installation with Rivets
AFC Panel Installation with Dynamic Bond
AFC Panel Size Restrictions
Need detailed safety data for our products? Find all the information you need by downloading the documents below.
Safety Data Sheet – AFC Stone
Safety Data Sheet – AFC Core
Safety Data Sheet – AFC Matte
Safety Data Sheet – AFC Surface
Safety Data Sheet – AFC Rustic
The visible attachment system fastens the fiber cement panels to metal or wood using stainless steel screws or rivets. Screws are used with wood substructures and rivets are used with metal substructures that can be either steel or aluminum.
The concealed attachment system uses an adhesive method of attachment called Dynamic Bond. Dynamic Bond can be used to attach the fiber cement panels to wood or metal substructures.
The XKEXLEX Z19 Attachment System is a perforated horizontal profile attachment system that’s best used for a narrow vertically oriented panel layout.